| Nominal Capacity | 1200mAh |
| Battery discharged at continuous current 0.65mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃ |
| Nominal Voltage | 3.6 V |
| Maximum Continuous Current | 40mA |
| Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃ |
| Maximum Pulse Discharge Current | 80mA |
| Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃ |
| Storage Condition | Temperature ≤ 30℃ Humidity ≤ 75%RH |
| Operating Temperature | -55℃ to +85℃ |
| Battery Dimension | See drawing on pag |
| Max Weight | 10.0g |
| Self-discharge Rate | 2% |
| Max self-discharged rate at ambient temperature 23±2℃ |
| Shelf Life | 10 years |
| Ambient temperature 23±2℃ |
1. Battery Characteristic
The rated voltage of the single battery is 3.6V, the operating voltage varies with the load, normally between 3.3V and 3.6V
We offer the specific energy density of 432Wh/kg
- Wide Operating Temperature Range
The battery can be in work between -55℃ ~ +85℃
Stable operating voltage, more than 90% of the capacity could be output with a fixed voltage
Under the condition of normal temperature, the battery self -discharge rate of no more than 2% per year
Battery sealing using the fully sealed structure to reduce the leakage of the battery, make the battery can be stored at room temperature for more than 10 years
2. Manufacturing Advantages
- There is advanced automatic technology in HCB;
- The technology in HCB is advanced and automatic;
- High power, high capacity(hermetic & semi sealing) or low temperature batteries are produced in HCB;
- It is workable for us to provide multiple cascade and parallel connecting ways and combining suggestions with HCB customers;
- Multiple safety design.
- Since 1995, we have started to produce the Li-SOCl2 batteries and we have much experience in it.
3. Lithium Thionyl Chloride (Li-SOCl2) battery has high energy density, and its nominal voltage is 3.6V. Bobbin structure is best suited for low current discharge and spiral structure is best suited for high current discharge.
Principle and Reactions:
The positive active material of Li-SOCl2 batteries is liquid Thionyl Chloride (SOCl2) and negative active material is Lithium (Li).
4. APPLICATION
Medical Instruments, Cash Registers, Alarms and security wireless devices, Mobile asset tracking, Electronic Meters (Water, Gas, Electricity), Automotive telematics, Vehicle tracking device, ETC (Electronic Toll Collection System).
APPLICATION
Fully automatic cameras with flash and exposure meter, Lighting, Radios, Electronic locks, Medical equipment, Water, gas and electricity meters, Memory backup power sources.
